88' Ocean King 2020

$6,350,000

88' Ocean King 88 2020 Ocean King 88 88' Ocean King 88 2020 Salon 88' Ocean King 88 2020 Salon 88' Ocean King 88 2020 Master Stateroom 88' Ocean King 88 2020 Galey 88' Ocean King 88 2020 Sundeck 88' Ocean King 88 2020 Side Deck 88' Ocean King 88 2020 Jacuzzi 88' Ocean King 88 2020 Stern 88' Ocean King 88 2020 General Arrangement

Interested In This Yacht?

To Learn More Contact

United Yacht Sales Logo

UYS Alliance Marine

410.490.2628

Send Us A Message

Full Name *
Email *
Phone Number *
Comments

Specifications

88' Ocean King 88 2020

Social Media Share

Broker Description

The Ocean King 88 is built on the base frame of a true ocean going tug. It has the same hull structure and base systems found in the tugs with changes to make her better suited to yacht use than you can find in a convertedtug. She has2475 sq ft of interior living space making her a true home on the water.The exterior spaceis 2690 sq ft , combinedit is 5165 sq ft, which ismuch larger then her closest competitors.

United Yacht Sales - Alliance Marine would love to guide you through a personal showing of this 88' Ocean King 88 2020. This yacht for sale is located in Chioggia Italy and priced at $6,350,000. For a showing please contact us by filling out the form on this page and we will get back to you shortly!

Specifications

Builder:

Ocean King

Model:

88

Cruise Speed:

10 KTS

Max Speed:

12 KTS

Range NMI:

5000

Beam:

26' 2"

Engine Details:

MAN D2842 LE412

Engine 1:

2018 760.00 HP

Engine 2:

2018 760.00 HP

Engine Fuel:

Inboard Diesel

Fuel Capacity:

10450 GAL

Water Capacity:

2930 GAL

Details

The Ocean King 88's lineage is a direct path from a deep sea tug. Genetic modifications have been made to influence her nature to be an outstanding Explorer Yacht without losing the intrinsic nature of this waterborne beast.She truly is a tug in yacht clothing, massively built with commercial ship’s systems in all of the important places yet refined and equipped to meet yacht standards of comfort and use.The Ocean King 88 is the Alpha in this size group of Explorers because of her commercial heritage. The 88 also has the most living space with 2470 sq ft of interiorspace and 2690 sq ft of exterior space for a total of 5160 sq ft of living area and can carry the largest tender in the group! Her heart is either a Commercial rated A rated MAN or a Commercial A rated Cat. These engines have 20,000 hours before major overhauls. At cruising speed that is 200,000 nm of exploring the world in safety and comfort.The use of highly reliable commercialsystems and no nonsense outfitting reduces down time and operating costs.The Ocean King is the Alpha predatorof Explorer yachts, refined, designed and built to roam the seas.

The Yacht will be built in accordance with the requirements as from the Italian Directive in force on the date of the signature of the agreement and directive “Recreational Craft Directive 94/25/CE” and in accordance with “RSG Guidelines”, Design Category “A”. Double bottom steel hull with integral tanks. All the tanks shall be structural. The double bottom shall be extended from the collision bulkhead to the transom, excluding the area reserved for the engine room. Proper holes shall be drilled in the keelsons, floor plates and currents to enable the easy drainage of liquids. The tanks included in the double bottom shall be provided with a proper number of manholes for inspection and cleaning. All the tanks shall have drainage. The fresh water tanks shall be treated with products suitable for the conversion of running water. The plating, built up profiles and standard profiles are to RINA specifications S275 JR (Grade A) or better. The workmanship and welding are according to the highest standards of shipbuilding and RINA regulations. Topsides, decks and transom shall typically be fair and smooth. Sheer, deck lines and rub rails executed fair and without bumps. All welding work carried out by qualified welders. Where appropriate the welds will be ground smooth.

  • Steel Hull Plating S 275 JR Grade A factory blasted and epoxy coated, thickness:
  • Bottom Plate = 5/10” - 4/10” (12-10-9 mm) and Side Plating = 5/16” (8-7-6 mm).
  • Keel: Steel S 275 JR Grade A thickness 8/10” ( 20 mm).
  • Collision bulkhead with watertight bilges and bulkheads throughout the boat.
  • Anchor placement in two hawseholes semi-recessed type realized in Stainless steel AISI 316.
  • 2 propellers without nozzle of 1280 mm of diameter with five blades.
  • 2 Rudders flanged to the shaft “NACA” profile
  • Stainless steel bulwark caps, SS solid rod lining at all scuppers and hawseholes and 4” SS pipe rub rail.
  • Stainless steel ports in hull sides with deadlights.
  • Interior partition walls are fully insulated up to 3¼” for maximum sound proofing.
  • All accommodations thermally insulated, including the hull.
  • All house doors are water resistant and lockable

The handrails realized in Stainless steel AISI 316 with a diameter of about 48 mm ( 1” 1/2) . The external Stairs will also be equipped with handrails in Stainless steel AISI 316 . Security and service handrails will be realized wherever necessary. The external decks will be covered with Natural Teak 12 mm thickness glued with vacuum technology, with a reasonable uniformity of the color. The external stairs will also be covered with the same product. Ceilings in wood with white color surface. The yacht will be equipped with a half pipe 200 mm heavy duty fender in stainless steel for hull protection. Windows Doors and Portholes: Lower deck:14 portholes with frameS in AISI 316 Steel, brand SCM or similar diam. 300 mm with tempered glass and polished stainless steel glass list and security aluminum coverS painted white. On request in accordance with RINA rules, some portholes can be open type with alarm sensor on Automation plant, if necessary. Main Deck and Upper Deck:28 Windows with sealed glass ,dark grey color thickness glass 10 mm. Pilothouse:7 fixed windows with sealed tempered glass with thickness 10 mm glass list . 4 professional wipers with arms in AISI 316 steel brand SPEICH with integrated command in Boening monitoring, with fresh water washing . 1 CVS ( Clear View Screen) brand SPEICH or Similar. Doors:The deck doors shall be three, watertight and realized in light alloy, with arm hinge and block system in open position. Exterior Accessories: Fly-bridge:

  • 1 large sundeck with cushions.
  • 2 Small settees with cushions.
  • 1 fridge station
  • 2 Tea tables
  • Courtesy LED lights on sundeck and settee.
  • 1 outlet high pressure fresh water wash down system.
  • 2 cleats for flags
  • 2 doors with steering locks for funnel access.
  • Mast in aluminum for electronics antennas, search light, horn and navigation lighting.
  • Audio system speakers and volume control.
  • Stainless steel AISI 316 hand rail for protection.
  • Oversized Scuppers inox AISI 316 for drainagewith Ocean king logo

Upper Deck/Pilothouse

  • Two (2) access doors in pilothouse with steering locks.
  • One (1) access door in upper deck with steering locks.
  • One prep station with small refrigerator and sink
  • Audio system speakers and volume control.
  • Stainless steel AISI 316 hand rail for protection.
  • One outlet high pressure fresh water wash down system.
  • Oversized Scuppers inox AISI 316for drainagewith Ocean king logo
  • One fire fighting station UNI 45
  • One ladder with teak steps for access to Fly-bridge.
  • One ladder with teak steps for access to Main deck.
  • One ladder with teak steps for access to Bow – windlass area.
  • Nr. 1 professional Knuckle hydraulic tender crane HS Marine with boom about 5.0 m. and 1750 Kg lifting capacity

Windlass area:

  • Two (2) horizontal 400 V anchor windlass, w/chain stoppers and claws.
  • Two (2) 275 Kg anchors and 250 Mt (150 + 100) . 19 dim. Chain steel grade U1.
  • Hatch to self draining stainless steel anchor locker.
  • Two (2) large double horn stainless steel mooring bollards.
  • One polished stainless steel mooring bollard ‘commercial look’ at bow.
  • Two (2) fairleads in Stainless steel AISI 316
  • Two (2) valves for chain high pressure washing
  • One fire fighting station
  • One stainless steel ladder from windlass area to chain and bow thruster rooms.
  • Two (2) electric fans for ventilation in Bow Thruster room and chain room.
  • One little mast for flag and bell .

Main Deck:

  • One shoe rack with teak wood cover
  • Aft deck Dining table with natural teak cover with 2 stainless steel supports.
  • One outlet high pressure fresh water wash down system.
  • Deck fills for fresh water inlet
  • Two access doors from main deck to Crew area and Kitchen with steering lock.
  • One access door to main saloon with steering lock
  • One access door to engine room with steering lock
  • One steel ladder from main deck to engine room.
  • Teak 180 mm wide cover all bulwarks.
  • Bulwark gates port and starboard.
  • One integrated steel sofa with cushion.
  • Two (2) fairleads in Stainless steel AISI 316
  • Oversized Scuppers inox AISI 316for drainagewith Ocean king logo

Swim Deck

  • One big swim platform with teak cover , approx 15 Meter/square
  • Hot and cold fresh water shower.
  • One access door watertight to garage.
  • Two (2) single horn SS mooring bollards in swim platform.

The superstructure built in light alloy type H 5083 weld in accordance with high standard RINA. The workmanship and welding shall be typically fair and smooth. Deck lines executed without bumps. All welding done by experienced welders. All external welds will be ground smooth.

  • Aluminum 5083 type for Superstructure: plate: 1/4” (6-5 mm).
  • Plating: Light alloy type 5083 thickness: 6mm.
  • Built up profiles and stiffeners: As plating.
  • Mast: It shall be realized in welded light alloy and bolted to the bridge with support for radars, antennas, lights.
  • Light alloy 5083 Superstructure painted with marine paint.

wo MAN D2842 LE 412 rated @ 1800 rpm 588 Kw continuous commercial duty marine diesel engines, four stroke, 12 cylinder V , turbocharged , intercooler with mechanically controlled fuel injection. Two Marine Gearboxes Reintjes WAF 364 reducer i=4,053 Engine Data:

  • Bore and Stroke: 128 mm x 142 mm
  • Cylinder displacement: 21,916 liters
  • Weight: 1.790 Kg

Rating Level:

  • 760 Hp (588 KW) at 1.800 rpm
  • Fuel consumption at maximum power: 148 l/hr each
  • Typical 20,000 hours to major engine service or rebuild
  • Soft engine mounts with anti vibration coupling

Engine room engine gauges:

  • Insulated engine room with hole plating coating for great professional look, easy maintenance and cleaning.
  • 1 Main Switchboard with Touch Screen monitor and automation plant.
  • 1 door with steering lock from engine room to stern garage.
  • 1 aluminum door with steering lock from main deck to engine room
  • 2 Marinox Shaft Lines 105 mm Diam.
  • 2 Five (5) bladed bronze propellers diameter: 50” (128 cm) without nozzle
  • Watertight access doors
  • Polished stainless steel hand rails
  • 4 axial fans 400 Volts 0,75 Kw at 1400 rpm with automatic fire dampers
  • AC and DC lighting
  • Aluminum non-slip flooring

Engine Room Insulation and Soundproofing: The base material shall be mineral wool with a density of 50 Kg/m3 and a variable thickness ranging from 50 to 100 mm, according to the different needs. The soundproofing system shall mainly consist of two types of treatment: either a sandwich of two layers of low-density mineral with a sheet copper layer in between, or a simple layer of mineral wool, according to the areas to be protected as well as the needs. In both cases the final overlapping of a holed aluminum sheet shall be foreseen. The insulating material shall be connected to the walls with metal nails either welded or glued to the structure. Living areas Insulation and Soundproofing:The base material shall be mineral wool with a variable density ranging from 15 to 50 Kg/m3 and a variable thickness ranging from 25 to 60 mm, according to the different needs. The insulating material shall be connected to the walls with metal nails either welded or glued to the structure

Acoustic and noise anti vibration insulation in engine room, all interior bulkheads, main & lower deck floors. Double acoustic bulkheads between the engine room and accommodations. Maximum acceptable sound levels throughout vessel shall be determined with the vessel operating at maximum continuous rated speeds with all specified equipment in operation. Estimated sound levels at Cruise speed at 11 knots with all normal services and air conditioning not in operation are as follows. Location:

  • Main Saloon <60 dB
  • Pilot House <58 dB
  • Owner Suite <58 dB
  • Guest Staterooms <62 dB

Fuel System: Fueling station on main deck (one starboard one port) w/overflow tank, sight gauges and spill retention system. Large diameter piping system vents in funnels in order to refuel diesel in few hours. Fuel transfer system from tanks (six) to day tanks (two) with pre-plumbed professional 400 V - 50 Hz pump ‘Gianneschi’ mod. CP30 0,37 Kw at 1450 rpm. All the valves for transfer operation are with electrical actuators and will be controlled from the Automation plant through touch-screen monitor in the main switchboard in engine room and/or in pilothouse. The fuel transfer from tanks to day tanks shall take place through a centrifugal purifier with water separator Alfa-Laval or Westfalia mod. OTC 3 capacity 400 l/h.

  • Fuel lines are in carbon steel with weld piping.
  • Dual Racor filter/water separators 500 micron from day tanks to main engines with manifold.
  • Racor filter/water separators 500 micron at generators.
  • Fuel tanks (eight) all integral to hull, and two (2) day tanks.
  • Liquid level indicators on all fuel tanks, as well as sight gauges on day tanks brand VEGA.

Main Engines Cooling and Exhaust System Sea water cooling open circuit for engines and generators, riser type with heat exchanger - brand Co.Fe.Me or equivalent. Dual sea chests with professional manifold. The sea inlets shall be realized by using a steel pipe with a proper thickness, welded to the bottom plating and flanged to the sea cock. Filters shall be in stainless steel. The pipes shall be in Aisi 304 steel and galvanized steel. Bilge Pumping System A complete professional bilge pumping system is installed with two professional bilge pumps 400 V- 50Hz 4 Kw each at 1450 rpm with a capacity of 20 M3/h with automatic alarms for high water in bilge and water sensor. Each pump will have inline check valves and auto/off/manual selection switch. All pumps will be also used for fire-fighting use. All pipes shall be in galvanized steel. The bilge tank shall have the capacity as foreseen by the regulations and a discharge line ashore in compliance with MARPOL regulations. Valves plant will be electric Wafer type and will be controlled from the Automation plant through touch-screen monitor in main switchboard in engine room and/or in pilothouse. On request a RWO purifying system for bilge water is installed. Fresh Water System One complete water pressure system will be installed, with integrated steel tank, two professional pre-plumbed JET pumps, 400 V- 50Hz 2 Kw at 1450 rpm brand ‘Gianneschi’ with pressure tank, piping, valves, fittings, pressure gauge and pressure control. On request, will be supplied a second JET pump for pressure wash down decks with some taps with quick coupling. On swim platform will be installed one faucet with cold and hot water. The pump(s) are connected to one pressure manifold and are laid out so that they can serve the system together or separately. The pump suction lines are connected to the crossover line between the tanks to allow the tanks to be drawn together or separately.

  • All pipes shall be in stainless steel AISI 316, press-fitting type
  • 2 Electric hot water heaters 100 l each with hot water professional pumps 400 V- 50Hz, 3Kw.
  • Liquid level indicators on all water tanks.
  • 500 Lt/h water making system IDROMAR or TECNICOMAR.
  • One sand filter and one UVA sterilization system are installed on the pipe line .

Black Water System One tank for black water with a capacity of 1,500 liters, with shore pump-out capability, and pre-plumbed pump for overboard discharge capability. WC discharges shall be collected in appropriate tank provided with a breather at the shaft top, with a flexible pipe and deodorant filter and treated through a purifying plant with Hamman or Tecnicomar, dimensioned for the number of people who can be embarked. All pipes and accessories shall be realized in Stainless Steel AISI 316 in engine room and in PE-HD outside engine room. Grey Water System One tank for grey water with a capacity of 1,500 liters. Gray water from the shower, basins, kitchen and food stores, laundry shall discharge via gravity into the collection tank. The gray water shall be directly discharged outboard or to the treatment plant. All pipes and accessories shall be realized in DRAIN 316. Windlass & Winches

  • Two professional horizontal anchors windlass 400 Volts 7.5 Kw @ 1450 rpm with chain gypsy for 19 mm chainbrand: Romagnoli or similar
  • Two Stern 400 Volts 5.5 Kw with inverter professional winches brand: Romagnoli or similar

Bow Thruster One professional bow thruster 400 Volts 55 Kw @1450 rpm with joystick control unit on the pilothouse brand: Romagnoli model: BTX 1200 CC or Similar. Optional : Stern Thrusters Twin professional Stern Thrusters 400 Volts 22 Kw @ 1450 rpm each with joystick control unit on the pilothouse brand: Romagnoli models: BTX 350 CC or Similar. Tender Crane One professional fully foldable telescopic knuckle type crane with articulated boom: capacity 900 Kg at 5.5 mt. brand: HS Marine mod. AK7. Optional Remote controller. Optional: One Professional knuckle boom type crane Hydraulic model AK10 with capacity 1750 Kg, brand: HS MARINE with Remote controller. Stabilizer system On board will be installed One Rodriguez system ESF-2200 Electric, Active and Zero-Speed stabilizer fins or similar brand. Hydraulic Gangways

  • One stern swimming ladder brand Besenzoni model SI 408 or similar brand
  • One telescopic hydraulic gangways brand Besenzoni model PI 383 or similar brand

Air Conditioning and Heating System The plant consist of 1 water cooler block, with heat pump. The Fan coils shall be placed in the insulated rooms for water/air treatment. CONDARIA brand or Similar with 240.000 BTU/h capacity with UTA for lower deck + 30 Kw boiler. The plant will be monitored from Automation plant on board. In general the best thermal hygrometric conditions shall be guaranteed in hot and cold waters. The system is rated for Mediterranean use. Arctic or Tropical condition will be quoted on request. Compressed Air Plant A compressed air power station shall be foreseen and planed in A.M., which will provide low pressure air (about 7 bar) for any automatism and board services. For such a plant an air cooled E/compressor, an air dehydrator filter and a tank with a capacity of 100 lt at 7 bar pressure. Sea Water Fire fighting system In the yacht will be installed one ‘ Self Protection’ system with two emergency professional pumps 400 Volts 3 phase, 4 Kw at 20 mt with direct connection to Sea Chest or through appropriate selection valve through bilge tank and one diesel pump that can be operated in case of an electrical failure. On board will be 4 fire-fighting stations with hydrants and hoses UNI45 type. The system is controlled from Boening automation Fire Detection system In the yacht will be installed one smoke detection in each room and one control detection system in Pilot House. Brand Autronica or similar. Engine Room Fire fighting system

  • In the yacht will be installed one ‘ AEROSOL’ fire-fighting system allocated in appropriate boxes direct in engine room.
  • 1 remote station with emergency control for closing diesel supply and axial-fan in engine room.

All electrical equipment located so as to be readily accessible for maintenance, repair or removal and is of a type proven satisfactory for marine use. All electrical equipment and wiring tested in accordance with applicable RINA rules. Any and all drawings and schematics relevant to the system shall be furnished to the vessel owner. The installation shall be splash proof in the interior and totally water proof at the exterior. All cables will be numbered and marked on the drawings. All the low tension cables and those for radio frequencies are laid separately from those at 220/400 V. When it is not possible, the cables with the same degree of insulation are used for Diesel Generators. An earth plate 3x400 Volts/50 Hz shall be installed and connected to an isolation transformer. Automation Plant A state of the art Automation Plant will be installed on board, BrandBOENINGwith touch screen panel on Main Switch Board and LCD monitor in pilothouse. This Plant will control: Axial fans in engine room, Navigation lights, Bilge system, Fuel transfer, Fire-Fighting system pumps, Diesel plant, Tank liquid level gauges, Power Distribution, Generators parallel, Shore power, main Pumps, Cameras, Search lights, Wipers, Horn, Rudders. Navigation Plant A state of the art Automation Plant will be installed on board, BrandBOENINGwith 3 touch screen monitors 19” and 2 touch screen monitors 15” in pilothouse. This integrated bridge, control of many system and integrated with FURUNO navigation technology ( GPS, Radars, Autopilot, Chart Plotters etc.) grant a professional bridge look. Diesel Generators

  • Two 400 V - 50 Hz Kohler 80 EFOZ - 80 kW, 100 kVA generators, in sound shield, with heat exchanger cooling, wet exhaust and exhaust separator
  • AC/DC distribution panels in utility room, main deck and pilothouse
  • Two (2) 150 amp engine driven alternators
  • Aft shore power hook-up, with 125 amp 100’ Glendinning cable with connector 400 Volts 3 phase with connection at the board transformer for constant voltage and isolation assurance. Will be provided also an automatic parallel with the shore power in order to keep power during the change from generators to shore power and vice versa.
  • The Main switchboard with frontal access, Touch Screen monitor, constructed in steel or painted aluminum will be positioned in the engine room.
  • 1 Charger Mastervolt 400 Volts, 100 Amp for service batteries 24 Volts.
  • 1 Charger Mastervolt 400 Volts, 100 Amp for emergency batteries 24 Volts.
  • 1 Charger Mastervolt 220 Volts, 75 Amp for engines starter batteries.

Batteries:

  • Two (2) sets of batteries Mastervolt 24 Volts with a capacity of 270 Amps. For services
  • Two (2) sets of batteries Mastervolt 24 Volts with a capacity of 360 Amps. For emergency.
  • Four (4) Set of batteries Mastervolt 12 Volts with capacity of 370 Amps. For engines starter
  • Masterbus and Mastershut for monitoring batteries and charger status

Distribution Circuit:

  • 400 V 50 Hz AC Three-phase circuit
  • 220 V 50 Hz AC mono phase circuit
  • 24 V DC Emergency circuit

Ship Name, Yard Plate and Ocean King Brand The Ship name realized in painting aluminum letters will be installed on stern. On request will be installed a ship name realized in Inox plate with LED lights. On two funnels will be installed the Ocean King Logo realized in Inox plate with backlit LED lights. On Valves, pumps and accessories will apply special identifying plates. On doors will apply appropriate hazardous labels. Inox Yard plate will apply on board.

  • 3 Monitors BONING touch screen 19” for navigation and Automation
  • 2 Monitors BONING touch screen 15” for Integrated Bridge command
  • 1 IPAD-IPHONE Interface
  • 1 Bronze Eco Sounder FURUNO 1 Kw B258
  • 1 Digital fish finder FURUNO DFF1
  • 1 RADAR ARPA FURUNO 12 Kw with 6,5 ft Open array 96 Nm
  • 1 RADAR FURUNO UHD 6 Kw with 4 ft Open array 64 Nm
  • 1 FURUNO MAXSEA Professional navigation software ECS
  • 1 FURUNO SATELLITE COMPASS Imo Version SC-50
  • 1 Hub 101 Ethernet FURUNO
  • 1 GPS FURUNO GP-33
  • 1 Autopilot FURUNO NAVPILOT 700-E2A
  • 1 AIRMAR WIND/WEATHER STATION NMEA 2000
  • 1 AIS Trasponder FURUNO FA-50 CLASS B
  • 2 VHF FURUNO FM-4721 DSC
  • 1 FURUNO NAVTEX RECEIVER NX-300
  • 1 FURUNO Ocean Signal EPIRB GMDSS
  • 1 FURUNO Ocean Signal SART GMDSS
  • 1 Satellite Antenna INTELLIAN TV SAT I9P ( Europe)
  • 1 FURUNO IMMARSAT FBB-250
  • 1 Search light 24 Volts integrated in Boening monitoring
  • 1 Magnetic Compass
  • 2 Controls for Main Engines + full monitoring engine data integrated in Boening monitoring
  • 1 Control for bow thruster integrated in Boening monitoring
  • 2 Controls for generators integrated in Boening monitoring
  • 1 LCD Control for Wipers integrated in Boening monitoring
  • 1 navigation Lights integrated in Boening monitoring

Paint will be ‘International Marine Paint’ . All painted surfaces will be free of dust, runs and orange peel. System of cathodic protection: The system consists of a series of zincs placed in the hull, rudder and propeller cuff. Application paint is in accordance with International guidelines and product datasheets. Before application paint, all Steel surfaces will be clean, dry and blast to near white metal Sa2.5 (ISO8501-1). UNDERWATER HULL:

  • Anticorrosive/abrasion resistant paint system, with high solids high performance antifouling
  • Primer: Interprime 820 White - Interprime 450 Bronze and aluminum - Epoxy A/F Tiecoat grey
  • Antifouling: Micron Extra black

STEEL TOPSIDES:

  • High performance scheme without fairing
  • Primer: Interprime 820 White
  • Coat: Interthane 990 White or black

SUPERSTRUCTURES:

  • High performance fairing and finishing scheme “PERFECTION Coating Cycle”
  • Primer: Epoxy GP coating White
  • Filler: Interfill 830/835 Grey –Epoxy Finishing Filler Cream
  • Epoxy Finish Primer: Interprime 820/880 Grey –Polyurethane Basecoat White
  • Coat: Perfection White

EXTERNAL DECKS:

  • High performance epoxy scheme
  • Primer: Epoxy GP Coating White
  • Filler: Interfill 830 Grey
  • Primer: Interprime 820 Grey

ENGINE ROOM, LOCKERS, TECH.SPACES:

  • Epoxy anticorrosive scheme, with polyurethane finish
  • Primer: Interior Primer 860 White/Grey
  • Coat: Interior Finish 750 RAL

BILGES, VISIBLE AREAS WET, STEEL:

  • Epoxy anticorrosive scheme, with polyurethane finish
  • Primer: Interior Primer 860 White/Grey
  • Coat: Interior Finish 750 RAL

INTERIORS, BEHIND LININGS:

  • Epoxy anticorrosive scheme, with polyurethane finish
  • Primer: Interior Primer 860 White/Grey

All interior layouts will be realized in accordance with General plan ‘Ocean King 88’ signed at the moment of business agreement. GUESTS' FINISHING STANDARDS STYLEThe interiors will follow the decoration theme designed by INNAVE on final decor drawings MATERIALS AND SAMPLESAll materials, woods, surfaces finishing, varnished or painted parts, upholstery, leather, hardware etc, will be presented to Owner for approval before starting of building interiors. MOCK UPA mock up of a typical interior corner will be built and presented to Owner for approval. WOODSDifferent kind of high gloss and mattvarnishedwood for walls, doors and furniture like oak or similar. FABRICSTo be selected from quality products catalogues. DOORSDoors will have hardware like anti-rattling devices and door holders. CABINETRY INTERIORSAll interior of furniture lockers, will be matt wood paneled, provided with clothes hanging devices and divided in areas with drawers and shelves following the Owner requests. Dishes, cups and cutlery, china and glasses (Owner supply) will be properly located following the Owner request. TYPICAL GUEST CEILING CONCEPTThe ceiling of a typical space will include one level change contoured by wooden frames; the recessed areas will incorporate fabric, wood or leather. TYPICAL GUEST LIGHTING CONCEPTLighting will be provided by different sources as:

  • Ceiling spotlights
  • Wall lights
  • Free standing furniture lights
  • "Rope" courtesy lights around ceiling frames and under furniture.
  • Step lights.
  • Wheelhouse night lights.

TYPICAL GUESTS CURTAIN CONCEPTFabric decorative curtains and blinds. Type of curtain will vary space by space and may include venetian blinds or sun rolling blinds. TYPICAL GUEST FLOORING CONCEPTWood staves floor or carpet. TYPICAL GUEST BATHROOM CONCEPTWashbasin and shower tray in Corian. Shower panel in mosaic or ceramic tiles. Glass shower door. TYPICAL GALLEY CONCEPTLacquered wood furniture. Stainless steel or Corian top.ARTThe Owner will supply all the art which will be installed by the shipyard. CREW FINISHING STANDARDS STYLEThe interiors will follow the decoration theme designed by INNAVE on final decor drawings. WOODSThey will be varnished wood and laminated wood. DOORSDoors will have hardware like anti-rattling devices and door holders. CABINETRY INTERIORSAll interior of furniture lockers, will be mat wood paneled, provided with clothes hanging devices and divided in areas with drawers and shelves following the Captain requests. TYPICAL CREW CEILING CONCEPTThey will be varnished wood and laminated wood. TYPICAL CREW LIGHTING CONCEPTSpot lights, nightstand lights and steps lights TYPICAL CREW CURTAIN CONCEPTVenetian blinds. TYPICAL CREW FLOORING CONCEPTWood staves floor or carpets.TYPICAL CREW BATHROOM CONCEPT

  • Washbasin and shower tray in Corian.
  • Shower panel in mosaic or ceramic tiles.
  • Glass shower door.

LOWER DECKOwner Stateroom

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent: white oak (snow)
  • Oak flooring
  • Wall wardrobe
  • Oak furniture ivory color with wood accent white oak snow color.
  • TV 42''
  • King size bed with recessed LED in headboard and wood drawers in the base
  • Ceiling in white lacquered wood
  • LED Spot

Owner Bath

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent: white oak color snow
  • Oak flooring
  • Glass Door
  • Oak furniture ivory color with wood accent white oak snow color.
  • Suspended Sanitary
  • Corian top and sink
  • Corian Shower
  • Shower covering in ceramic Marazzi brand
  • Ceiling in white lacquered wood
  • LED spot

Guest Suites

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent: white oak snow color
  • Oak flooring
  • Large Oak wardrobe with
  • TV 28''
  • Two large beds in brushed oak with wood drawers in the base;
  • Ceiling in white lacquered wood
  • Oak doors white color
  • LED Spot

Guest Baths

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent: white oak color snow
  • Oak flooring
  • Door
  • Oak furniture ivory color with wood accent white oak snow color.
  • Suspended Sanitary
  • Corian top and sink
  • Corian Shower
  • Shower covering in mosaic Appiani brand
  • Ceiling in white lacquered wood
  • LED spot

VIP Suite

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent: white oak snow color
  • Oak flooring
  • Large oak wardrobe with interior yellow color
  • TV 32''
  • Queen size bed in brushed oak with wood drawers in the base;
  • Ceiling in white lacquered wood
  • Oak doors white color
  • LED Spot

VIP Bath

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent: white oak color snow
  • Oak flooring
  • Glass Door
  • Oak furniture ivory color with wood accent white oak snow color.
  • Suspended Sanitary
  • Corian top and sink
  • Corian Shower
  • Shower covering in mosaic Appiani brand
  • Ceiling in white lacquered wood
  • LED spot

MAIN DECK

  • Main SalonWall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent: white oak snow color
  • Oak flooring
  • Oak brushed furniture ivory color with accent in oak white color
  • TV 50'' brand SAMSUNG
  • 8 person dining table
  • 8 chairs
  • Relaxing area with sofa brand
  • Ceiling in white lacquered wood with brushed oak staves
  • LED Spot
  • Wall lights

Galley

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent: white oak snow color
  • Oak flooring
  • Inox wall hood
  • Inox sinks 400 x 400 mm
  • Two induction plates brand ‘ SAMSUNG’
  • Refrigerator side-by-side brand SAMSUNG
  • Two refrigerators brand SAMSUNG
  • Dishwasher brand ‘ SAMSUNG’
  • Multifunction oven brand ‘SAMSUNG
  • Multifunction Microwaves brand ‘SAMSUNG’
  • LED Spot

Laundry/utility room

  • Wall covering: laminate Ivory color
  • Storage wardrobes in laminate
  • Two washers brand ‘Ariston Aqualtis AQ9F’
  • Washer/Dryer brand ‘Ariston AQM8D’
  • Dryer brand ‘Ariston TCL631’
  • Porcelain flooring

Crew Area

  • Wall covering: laminate Ivory color
  • Storage in laminate
  • Oak flooring Gray color
  • TV 24”
  • Baths with laminate furniture and recessed sinks

UPPER DECK Lounge

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent: white oak snow color
  • Oak flooring
  • Oak brushed furniture ivory color with accent in oak white color
  • Wardrobes
  • TV 40'' brand SAMSUNG
  • Large settee with bed
  • Ceiling in white lacquered wood with brushed oak staves
  • LED Spot

Captain cabin

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent: white oak snow color
  • Oak flooring grey color
  • large oak wardrobe with drawers in white color
  • TV 24'' brand SAMSUNG
  • Large bed in brushed oak ivory color
  • Bedside table in brushed oak ivory color
  • Ceiling in white lacquered wood
  • LED Spot

Captain Bath

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent: white oak color snow
  • Wood accent: white oak color snow
  • Oak flooring gray color
  • Oak furniture ivory color with wood accent white oak snow color.
  • Suspended Sanitary
  • Corian top and sink
  • Corian Shower
  • Shower covering in mosaic Appiani brand
  • Ceiling in white lacquered wood

Pilot House

  • Wall covering: Brushed oak brown color with wood inserts polished light brown colorWood accent: coated oak color light gray
  • Oak flooring
  • Helm station in brushed oak, opaque coating, brown color
  • Furniture in brushed oak, opaque coating, brown color
  • One helm chair brand ‘Besenzoni P216 President’ or similar
  • Large settee in brown color
  • Ceiling in oak wood, opaque coating, brown color
  • LED spot

Interior Lighting:

  • All interior lighting will be realized with LED technology also in Crew areas.
  • Owner and VIP suites, main saloon, upper deck and pilothouse lighting will be equipped with dimmer switches.
  • On beds and wardrobes will be apply recessed LED lights.
  • Spot LED lights brand Cantalupi Lighting mod. DALY or similar

Underwater lightingOn stern will be installed 6 Underwater LED lights brand Cantalupi Lighting mod. SEALED SY9 or similar External lighting

  • Spot LED lights on ceiling brand Cantalupi Lighting mod. TECNO or similar
  • Courtesy LED lights brand Cantalupi Lighting mod. MICRO or similar
  • Spotlights with inclination setting on Upper Deck and Solarium Deck brand Cantalupi Lighting mod. OVER or similar
  • Strips LED under sundeck and external furniture
  • Fenders & fender lines (6).
  • Flare kit, 6 whistles, Ship’s bell, & Distress Flag.
  • Mooring lines (8) .
  • Zincs and Antifouling bottom paint.
  • First aid kit.
  • Portable fire extinguishers throughout the boat.
  • Safety package for unrestricted navigation >50 mg.
  • Fuel filters for main engines and generators.
  • Spare parts, miscellaneous electrical and plumbing fittings.
  • 100 ft. cord for dockside electric connection.
  • Portable air horn.
  • Technical files with diagrams, owner manual and instruction to the captain
  • Selling price is EXW Company, Chioggia (Venice)

This listing is presented to you courtesy of a member of the International Yacht Brokers Association and may be centrally listed with another broker. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey direct representation of a particular vessel.The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Other Yachts for Sale
90' Mcqueen Long Range 2002 | Moon Dancer

Moon Dancer

90' Mcqueen 2002

Tampa, Florida

87' Johnson Raised Pilothouse My 2003 | Sixty Six

Sixty Six

87' Johnson 2003

Unknown, Bahamas

92' Pershing 92 2012 | Doris

Doris

92' Pershing 2012

, France